• Joe Rocket Phoenix Gloves

    I posted about these gloves in the Gear Forum, and Hotfix suggested I write a review. I altered the text a bit from the original post to make it more of an article.

    I started riding a little over two years ago in February of '03. The weather here was cold to cool, so my leather gloves were comfortable. Houston experiences oppressive heat, so once summer hit, I realized I needed another pair of gloves.

    I'm a huge fan of Joe Rocket. I have the Phoenix jacket and pants, and I have one of their tank bags. I'd read some rousing testimonials about these products, so I trusted them. Still do. Two summers ago, when I needed summer gloves, I decided to stick with the JR Phoenix reputation. I went to my nearest dealership and found Joe Rocket Phoenex gloves and bought a pair. The gloves are very comfortable, and after I rode a mere half block, I could feel the difference and loved them. I now believe that, while the gloves are comfortable, they will not protect your hands at all.

    Since buying the Phoenix gloves , I've read one or two accounts where the gloves simply didn't hold up in a crash situation. At first I thought maybe these were exceptions, but during my ride this last Saturday, I'm inclined to believe it. No, I didn't go down. However, I noticed that the side of the index finger was nearly worn through. I could see my finger through the threads remaining at the spot of wear.

    The Phoenix gloves are mesh on the backs of the hands and fingers, with carbon over the knuckles. The sides and palm sides of the fingers are constructed of fairly thin suede, and the palms have that same grade of suede, reinforced with another layer of the same. This does make them comfortable, but I did wonder how well that thin suede would hold up in a crash, as I've had suede jackets that seemed thicker. The point of the worn area is strange, as that part of the glove doesn't come in contact with anything. It's on my right hand, which rarely, if ever, leaves the throttle grip. Nothing touches that part of the glove. Or so I thought. After we mounted up, I realized that the very tip of the glove of my right thumb (not my thumb itself, just the tip of that part of the glove -- I have short fingers and that happens on some gloves). The vibration from the engine and the road causes those suede parts to rub against each other at the point of wear. So here's the big question, if a glove can't provide protection against itself, how can it protect my hands against concrete or asphalt??

    There are a couple of caveats to this review.

    Caveats
    • My gloves are a couple of years old. However, the first time I rode in the rain, the suede felt very flimsy. In addition, I only have 4700 miles on my bike total, so I've put even fewer miles on the gloves, and I'm really not hard on my equipment or my gear.


    • I've seen the latest design of Phoenix gloves, and they appear to have added leather to the palms and fingers, so this review could be moot. Therefore, take this information how you will, but be discriminating when shopping.


    If you're still leaning toward purchasing a pair of Joe Rocket Phoenix gloves, I would heartily suggest buying or shopping for the Phoenix gloves in person, rather than online, to examine their quality.
    This article was originally published in forum thread: Joe Rocket Phoenix Gloves started by Lezbert View original post
  • Recent Forum Posts

    NORTY

    https://uploads.tapatalk-cdn.com/20190422/02d4e101...

    https://uploads.tapatalk-cdn.com/20190422/02d4e101b2e2a5c90380d3cbcfdf7c26.jpg
    Hereís my bike (on the same trail.)



    Sent from my iPhone using Tapatalk

    NORTY Yesterday, 12:40 PM Go to last post
    NORTY

    Hereís a pic from Saturday....

    Hereís a pic from Saturday.
    https://uploads.tapatalk-cdn.com/20190422/16e59f35e031d471db250ed8bdeb9259.jpg
    Log crossing on the trail. Not me as Iím taking the pic.


    Sent from my iPhone using...

    NORTY Yesterday, 12:39 PM Go to last post
    NORTY

    Dyna's rock!

    I bought an FXD back in 1994. It was a '95 model. I rode that bike for 21 years. Put a fair amount of miles on that EVO too. Like any Harley, the EVO did have an Achille's heel. This being the ICB....

    NORTY 04-21-2019, 11:59 PM Go to last post
    CountofQ

    Around here, the EVO era models are typically...

    Around here, the EVO era models are typically 7000 or less. A few higher. Of course we are talking 20 plus years old bikes.

    CountofQ 04-20-2019, 07:34 AM Go to last post
    AZridered

    Dynas have become quite popular since they were...

    Dynas have become quite popular since they were discontinued as a separate model line last year. Prices have slid up on what used to not be a teribly strong seller.

    AZridered 04-19-2019, 11:52 PM Go to last post