• Vance & Hines pipes (Honda Aero 750)

    I've had these on my Aero 750 for about 2 months now and absolutely love the sound from these pipes. The give the 750 a big bike sound, that is indistinguishable from other bigger bikes, and or Harleys on the road.

    Overall sound is fairly deep and very throaty. My preference would be for it to be just a little deeper, but that may not be possible with a 750. The nice thing about the sound is that at low throttle they are not that loud and are quite manageable, it's when you crack open the throttle that they really rip.

    These pipes are a good 5-10 pounds lighter than the stock exhaust.

    Overall quality seems to be pretty good, but I did have a hard time with the front exhaust getting a good seal. I went through two gaskets to get a good seal on the front exhaust.

    Installation time was around an hour, then another 1/2 hour getting the front exhaust to seal properly.

    I also have the Stage 2 Dynojet jet kit installed on my bike using the 136 jet. I also removed the snorkel from the air cleaner. The bike has a similar feel off the line to the stock set up, but once you hit the mid range the bike picks up much better than stock. I would say power output is about the same until you reach about 3000 RPM from that point I'd say there is a good 4-6 horsepower more than stock.

    With the Dynojet kit you also get a free dyno run, which I plan on scheduling sometime in the near future to get an exact number on overall horsepower with the changes to the bike.

    With the V & H Cruzers on my bike I smile every time I fire it up, definitely worth the money paid.
    This article was originally published in forum thread: Vance & Hines pipes (Honda Aero 750) started by Wookie View original post
  • Recent Forum Posts

    crankshaft

    BUG BASH XVI On The Road Aug 2 - 4th 2019

    Bug Bash XVI ON THE ROAD Aug 2 Aug 4 2019

    Trying a little something different this year. We're taking Bug Bash on the road to Athens Ohio.

    So set the dates aside and plan to ride to Athens,...

    crankshaft Today, 08:37 AM Go to last post
    Trials

    :banana: Come help feed the bugs on the Bruce...

    :banana: Come help feed the bugs on the Bruce Peninsula this weekend if you are up for it:biker:
    https://www.ataont.ca/wp-content/uploads/2019/05/SERVER-UTQBOK1S122.pdf

    :wiggleit: was awesome...

    Trials Yesterday, 07:39 PM Go to last post
    Sorg67

    The rear sprocket looks very good. I have not...

    The rear sprocket looks very good. I have not examined the front sprocket yet.

    Sorg67 05-21-2019, 05:15 PM Go to last post
    Trials

    Should look closer to these original sprockets I...

    Should look closer to these original sprockets I have been riding in competition for 6 years. Countershaft sprocket is steel and on its 3rd chain. Teeth should not be pointed....

    Trials 05-19-2019, 02:35 PM Go to last post
    Shadow Shack

    Just realize that there is a point where the...

    Just realize that there is a point where the chain has stretched enough that no amount of tightening will keep it serviceable. When it gets to that point, you can tighten it to spec before heading...

    Shadow Shack 05-18-2019, 07:35 PM Go to last post